← All news

Industry

Japan’s Automakers Agree to Standardise Steel, Resin and Wire Harnesses to Stay Competitive

By CARC Editorial Team · November 19, 2026 · 15 min read

Japan’s major automakers have agreed to do something that would once have seemed unthinkable in one of the world’s most competitive industries: standardise the parts and materials they use, together, in order to stay competitive. The Japan Automobile Manufacturers Association, known as JAMA, announced on November 19, 2026 that Japan’s automakers will standardise selected materials and components, working with the Japan Auto Parts Industries Association, known as JAPIA. Reuters reported the announcement on November 19, 2026, under the headline “Japan auto industry targets common standards to strengthen supply chain,” and Automotive News covered it the same day as a direct response to competition from China. The plan starts with three areas — steel, resin and wire harnesses — and it is framed not as a merger or a shared platform, but as a deliberate decision to cooperate on the parts customers never see, so that the companies can compete harder on the parts they do see. For an industry built on fierce rivalry between Toyota, Honda, Nissan and their peers, that is a significant shift, and it is one JAMA’s chairman presented as a matter of survival rather than convenience.

The announcement was made at a news conference in Tokyo on November 19, 2026, by officials from JAMA and JAPIA, according to Reuters. Japanese media had reported the plan on November 18, before the formal announcement, and the story was then covered by Reuters, Automotive News, MarketWatch and other international publications. JAMA’s chairman is Koji Sato, who is also vice chairman of Toyota Motor Corporation, and he outlined the drive at the Tokyo news conference, Automotive News reported on November 19, 2026. Sato’s dual role matters: he speaks both as the head of the industry association and as a senior executive of the world’s largest automaker, Toyota, which sold about 11.3 million vehicles in 2025, its best year ever and its sixth straight year at number one. When Sato says the industry needs to cooperate, he is speaking for a group that includes the companies that have defined Japanese manufacturing for decades, and he is doing so at a moment when that manufacturing model is under its most serious pressure in a generation.

JAMA represents 14 automaker members, according to reporting by Nippon.com summarised in coverage of the announcement, including Toyota, Honda, Nissan, Suzuki, Mazda and Subaru, as well as Mitsubishi, Isuzu, Yamaha and other Japanese vehicle makers. The association’s members are not a single company or a single alliance; they are direct competitors in Japan and in export markets around the world, with separate brands, separate dealer networks and separate engineering organisations. JAPIA, the Japan Auto Parts Industries Association, represents the suppliers that sit behind them, the companies that make the steel, the plastics, the wiring and the thousands of other components that go into a modern car. The November 19 announcement was therefore a joint statement by the carmakers and their supply base, not a unilateral declaration by one manufacturer. That joint character is important, because standardisation only works if both sides adopt it: carmakers must agree to use the same specifications, and suppliers must be able to build to those specifications at volume without maintaining dozens of near-identical variants.

The first priority is steel. For steel, manufacturers will seek to consolidate low-volume materials and to establish common evaluation standards, Reuters reported. In practice, that means reducing the number of different steel sheet types and grades that each automaker specifies, and agreeing on how those steels are tested and judged. Steel is used throughout a vehicle body and in many structural parts, and each automaker has historically developed its own specifications for strength, formability, corrosion resistance and surface quality, even when the underlying material was very similar. The result is a proliferation of low-volume grades, each of which must be produced, stocked, tested and certified separately, adding cost at every step. By consolidating those grades and agreeing on common evaluation criteria, JAMA hopes to simplify procurement, increase order volumes for the grades that remain, and reduce the engineering time spent qualifying near-duplicate materials. A JAMA official did not quantify how much of a vehicle would be covered by the plan, Reuters reported, but said steel and resins accounted for a significant portion of vehicle weight, which is why they were chosen first.

The second priority is resin, the plastics that make up much of a modern car’s interior, exterior trim and under-bonnet parts. For resins, the initial focus is on recycled materials, Reuters reported, and on aligning recycling-related evaluation criteria that currently vary among automakers, according to reporting of the announcement. The Tech Marketer, which covered the announcement on November 19, 2026, summarised the resin strand as promoting the use of recycled materials and improving standardisation, including common recycling protocols for plastics. That wording matters for two reasons.

First, recycled resin is a sustainability issue: automakers face growing pressure from regulators and customers to use more recycled material and to design cars that can be recycled at the end of their lives. Second, recycled resin is a quality and consistency issue: different automakers currently judge recycled plastics by different tests, so a supplier that meets one company’s standard may not meet another’s, even for the same part. Common evaluation criteria would allow recycled material to be used more widely, with confidence, and would support a circular recycling economy in which material from old cars can be reused in new ones. What the announcement does not yet do, and what coverage was careful to note, is specify a universal resin grade that every automaker must adopt. No single grade, no single recycled-content percentage and no implementation schedule for resin were published on November 19.

The third priority is the wire harness, the bundle of electrical cables that connects a car’s electronic devices, sensors, motors and control units. For wire harnesses, manufacturers will seek to reduce wire varieties and promote production automation, Reuters reported, and The Drive’s summary of the Automotive News report on November 19, 2026 described the strand as including wire-harness colour coding. The scale of the problem is striking. There are around 70,000 types of wire harnesses, according to reporting of the announcement, a figure that reflects decades of model-by-model, trim-by-trim and market-by-market variation. Each variant may differ in length, in the number and colour of its wires, in its connectors and in its routing, and each must be designed, built, tested and stocked separately. That variety makes large-scale automation difficult, because a robot or an automated line that can build one harness cannot easily switch to another without retooling. Reducing the number of wire varieties, standardising wire colours and encouraging automation are therefore linked: fewer variants make automation feasible, and automation makes production faster, cheaper and more consistent. Sato had earlier estimated that standardising wire harnesses alone could boost productivity tenfold, according to Automotive News reporting summarised in August 2026, a claim that underlines how much inefficiency the current variety creates.

The reason JAMA is acting now is competition, and specifically competition from China. Reuters put it plainly in its November 19 report: Japanese automakers are under pressure to boost competitiveness as Chinese rivals have gained market share globally over the past few years, boosted by domestic supply chains that have helped them develop new cars quickly. Automotive News framed its November 19 story in the same terms, with the headline “Facing China’s challenge, Japan carmakers team up to slash supply-chain costs.” The pressure is visible in market after market. Chinese brands took 12.7 percent of European sales in the third quarter of 2026, against 11.9 percent for Japanese carmakers, their first lead over a full quarter, according to figures reported by Dataforce and summarised in October 2026 reporting. In September 2026 alone the Chinese share reached a record 14.5 percent, against barely 1 percent five years earlier. China also overtook Japan earlier in 2026 to become the largest source of imported new vehicles in Australia, ending a 28-year streak, with 175,151 new vehicles sold in Australia in the first half of 2026 manufactured in China, according to VFACTS figures. Those are not distant threats; they are sales lost in markets Japan once dominated.

The speed gap is as important as the market-share gap. Japanese carmakers typically need four to five years to develop a vehicle, while some Chinese rivals are reported to manage it in under two years, according to reporting in October 2026 that stressed those were broad figures rather than fixed timelines for every model. BYD executive vice president He Zhiqi was reported as saying that 650 new or updated cars launched in China in the first half of 2026, or around 25 vehicles per week, a pace that reflects a supply chain built for rapid iteration. Chinese manufacturers share components widely, standardise parts across dozens of brands and sub-brands, and develop a core platform once and then replicate and calibrate it, according to analysis of the Chinese approach. That “hyper-fast component commercialisation,” as analysts have called it, is the mirror image of the Japanese problem: where Chinese firms share, Japanese firms have historically differentiated, even on parts customers cannot see. JAMA’s plan is, in effect, an attempt to adopt the cooperative half of the Chinese model without abandoning the competitive half of the Japanese model.

Sato has been making that argument for months. In August 2026, he urged Japanese car manufacturers to standardise commodity components, from steel grades and plastics to wire harnesses and more, according to Autofile’s report on August 17, 2026. “Right now, the most important theme facing the Japanese auto industry is improving ‘international competitiveness’,” Sato said to Automotive News, in comments summarised in October 2026 reporting. “We aim to strategically create ‘areas of cooperation’ to improve efficiency, thereby accelerating coexistence in the essential ‘areas of competition.’” The phrase “areas of cooperation” versus “areas of competition” is the conceptual core of the November 19 plan. Sato is not proposing that Toyota, Honda and Nissan build the same car, or use the same engine, or share the same styling. He is proposing that they agree on the invisible commodities — the steel grade, the resin test, the wire colour — so that they can spend their engineering time and money on the visible differences: design, performance, software, driver assistance and brand character. “We decided to start with these areas in response to concerns raised by on-site people,” Sato said at the November 19 press conference, according to reporting of his remarks, a reference to the factory-floor and supplier engineers who deal with the variety every day.

The November announcement did not emerge from nowhere inside JAMA. According to industry sources cited in reporting on November 19, standardisation was listed by JAMA in December of the previous year as one of the themes to be addressed in fiscal 2026, and it is one of seven priority challenges JAMA is tackling to ensure the country’s carmakers survive current industry storms, according to Autofile. The association plans to expand the scope of standardisation in stages while coordinating with auto parts industry groups, and officials are also studying common standards for steel tolerances and resin materials, Autofile reported. While JAMA has yet to establish formal deadlines, it aims to make progress on standardising the first batch of components or materials within the next year or two, according to Automotive News reporting summarised in August 2026. That timetable is deliberately vague: it promises movement within one to two years without committing to a date for a finished standard, a completed switch-over or a quantified saving. For an industry that has spent decades building separate specifications, a one-to-two-year horizon for the first results is ambitious, but it is also a recognition that the work will be iterative rather than a single big-bang change.

That logic is already visible in a separate agreement between two of JAMA’s members. In August 2026, Nissan and Honda announced a joint development agreement to standardise selected electronic control units and software, with application planned from fiscal 2029, according to October 2026 reporting. Electronic control units, the small computers that manage everything from the engine to the infotainment system, are a natural candidate for standardisation for the same reason as wire harnesses: they are numerous, they vary by model and supplier, and they add cost and complexity without adding visible differentiation. The Honda-Nissan agreement shows that the idea of cooperating on invisible components is not limited to JAMA’s three initial priorities, and it suggests that the November 19 announcement could be the first step in a wider programme. JAMA has said it plans to expand the scope of standardisation in stages, and the envisioned list of newly standard parts could expand to cover parts made by suppliers at home and abroad, feeding the country’s marques globally, according to Autofile’s August 2026 report. The first three areas are therefore a test: if steel, resin and wire harnesses can be standardised without damaging quality or brand identity, other components will follow.

Wire harnesses are, in many ways, the clearest illustration of why JAMA chose the three areas it did. A modern car contains kilometres of wiring, connecting hundreds of sensors, actuators and control units, and the harness that carries that wiring is one of the most labour-intensive parts of a car to build. It is typically assembled by hand, with workers routing wires through a board, taping them together and fitting connectors, a process that is difficult to automate when every harness is different. The figure of around 70,000 wire-harness types, reported in coverage of the announcement, is not a precise engineering count but a measure of the variety that has accumulated across models, trims, markets and model years. Reducing wire varieties, standardising wire colours so that a worker or a machine can identify a wire at a glance, and encouraging production automation are therefore three sides of the same problem. If the number of varieties falls, automation becomes feasible; if automation becomes feasible, production becomes faster and more consistent; and if production becomes more consistent, quality improves and cost falls. That chain is why Sato singled out wire harnesses in August, and why the November plan puts them alongside steel and resin as a first priority rather than a later one.

The plan’s limits are as important as its ambitions, and the November 19 coverage was careful to state them. A JAMA official did not quantify how much of a vehicle would be covered, Reuters reported, and the associations did not specify how much of a car the plan will cover, as other summaries noted. The announcement does not yet specify a universal resin grade or an implementation schedule, as The Tech Marketer noted, and JAMA has not publicly established a single resin grade that every automaker must adopt. No cost-saving figure was published, no deadline was set for the first standard, and no list of the specific steel grades or wire types to be consolidated was released. That vagueness is not necessarily a weakness: a joint announcement by 14 competitors and their suppliers cannot, on its first day, publish a detailed technical specification without months of engineering work. But it does mean that the November 19 announcement should be judged as a direction of travel rather than a finished reform. The test will be whether, in one to two years, JAMA can point to a specific steel grade that has been consolidated, a specific resin test that has been aligned, or a specific wire-harness variant count that has fallen.

What to watch next is therefore not a new car, but a series of technical and organisational milestones. The first will be any detailed publication from JAMA or JAPIA on which steel grades are to be consolidated, which resin evaluation criteria are to be aligned, and how many wire-harness variants are to be eliminated in the first phase. The second will be evidence of adoption in production: a model launched in 2027 or 2028 that uses a standard harness or a consolidated steel grade, or a supplier announcement that it has automated a harness line to a JAMA standard.

The third will be expansion: whether JAMA adds a fourth or fifth area, such as electronic control units, fasteners, connectors or other commodity parts, and whether the standards are adopted by Japanese suppliers abroad and by overseas plants. The fourth will be the competitive response: whether Chinese rivals, who already share components widely, respond by moving faster still, and whether European and American automakers, who face the same cost and speed pressures, follow Japan’s example with their own standardisation efforts. None of those milestones has a date yet, and JAMA has not committed to one, but the one-to-two-year horizon mentioned in Automotive News reporting gives a rough window in which the first results should be visible if the plan is on track.

In the longer view, the November 19 announcement may be remembered less for its three initial priorities than for the precedent it sets. If Toyota, Honda, Nissan, Mazda, Subaru, Suzuki, Mitsubishi and their peers can agree on steel, resin and wire harnesses, they can, in principle, agree on other commodities as well, and the boundary between cooperation and competition will have shifted. That shift has been discussed in Japan for years, in the context of autonomous driving infrastructure, logistics, taxation, raw-materials security and talent recruitment, all of which JAMA has listed among its seven priority challenges.

The standardisation plan is the most concrete of those challenges to reach a public announcement, and it is the one with the most direct link to cost and speed. Whether it succeeds will depend on execution, not on the announcement itself, and on whether the companies that have spent a century competing can sustain a collaboration that requires them to give up a measure of control over their own specifications. For now, the facts are these: on November 19, 2026, JAMA and JAPIA announced a joint effort to standardise steel, resin and wire harnesses; the aim is stronger supply chains, greater manufacturing efficiency and competitiveness against foreign manufacturers, above all China; and the details — the grades, the tests, the timetable and the savings — are still to be worked out. That is a modest announcement with potentially large consequences, and it deserves to be watched as closely as any new model launch.

Sources: Reuters, Automotive News, The Tech Marketer, Nippon.com, Autofile